Schuko Unternehmensprojekte

Führungskräfteentwicklung

Diese Weiterbildung soll die Führungskräfte der Schuko GmbH qualifizieren, ein zukunftsorientiertes Führungsverständnis herzuleiten und umzusetzen.

Einführung Lean Management

Um unsere Geschäftsprozesse und vor allem unsere Auftragsprozesse weiter zu digitalisieren, führen wir das "Lean Management" ein.
Schuko Bad Laer betrifft das in den Bereichen "Lean Produktion" und "Lean Administration". Dieses Projekt wird mit Mitteln des Europäischen Fonds für regionale Entwicklung gefördert.

Weiterbildung Lean Production

Der Standort Schuko Trebbin erhält eine Weiterbildung zum Thema "Lean Production". Diese Maßnahme wird durch das Ministerium für Wirtschaft, Arbeit und Energie aus Mitteln des Europäischen Sozialfonds und des Landes Brandenburg gefördert. Der Europäische Sozialfonds (ESF) ist Europas wichtigstes Instrument zur Förderung der Beschäftigung. Er fördert die Chancengleichheit auf dem Arbeitsmarkt, unterstützt die Menschen beim Zugang zu besseren Arbeitsplätzen und bei der beruflichen Bildung und Qualifizierung.
Mehr Infos unter https://esf.brandenburg.de u. https://ec.europa.eu

Mobile dedusting units Profi-S & Duplo

The mobile chip extraction system for your workshop

  • low-cost positive-pressure dirty air extraction unit
  • delivered ready to plug in for easy connection
  • wheel-mounted for universal mobile use
  • acoustic enclosure for low noise level
  • easy disposal through discharge to chip bag
  • numerous accessories available

Questions
on this product?

Description

The Profi-S and Duplo mobile dust collectors are versatile and proven systems for rapid chip extraction. They provide for clean working spaces even in places where permanent installation of extraction systems would be too complicated or impossible due to space restrictions. A Profi-S or Duplo dust collector can be used either as a mobile ‘vacuum cleaner’ with various attachments or permanently connected to a machine (connection nozzle size of 140, 160 or 180 mm).

Extraction is started manually with the push of a button. These units work with positive pressure (dirty air extraction), which makes them unsuitable for extraction of highly explosive dust such as wood, aluminium, asbestos or dust of dust explosion class ST1, ST2 or ST3. Extraction of health-endangering, lung-penetrating substances, gases or fumes cannot be performed with air recirculation. In this case exhaust to outside the building must be set up.

For wood dust use of a tested mobile dust extractor is prescribed.
More on mobile dedusters

The extracted chip-air mixture is cleaned by the top filter sack made from a special anti-static cloth (dust class M). For dust-free disposal the separated particles fall into an easily replaceable sturdy plastic chip collection bag below.

A regeneration mechanism is not provided for these units. It is sufficient to clean this type of unit manually by tapping gently on the filter cloth (with the system at a standstill!) at intervals depending on the intensity of use and the chip volume.

Sample applications:

  • Direct chip extraction for drilling, stamping and planing, e.g. in metalworking.
  • Also suitable for profile milling, cut-off sawing or mitre sawing of plastics.
  • In paper conversion they keep the work environment clean during stamping and label production and by extracting edge strips and residual paper.

Technical data

Type Profi-S II Profi-S III Duplo S 18
Suction nozzle (Ø mm) 140 160 180
Motor power (kW) 1.5 2.2 2.2
Maximum flow rate (m³/h) 1,661 2,170 2,380
Filter surface area (m²) 3.8 3.8 7.5
Filling volume (l) 170 170 340

Downloads

Product brochure

The following products might also interest you:

Questions on a particular product?

Call our product advisor on 0049 7581 4871 0 or use the form below. A Schuko employee will only visit you if you explicitly require it and have indicated this above.

Sender
Special questions:
In order for us to process your request, all fields marked with an asterisk (*) must be completed.
Submit